Comments on: bench-md109601_vert http://thecraftsdept.marthastewart.com/2013/01/diy-industrial-furniture.html/bench-md109601_vert Martha Stewart's Craft Blog Fri, 17 May 2013 11:19:23 +0000 hourly 1 By: Marcie McGoldrick http://thecraftsdept.marthastewart.com/2013/01/diy-industrial-furniture.html/bench-md109601_vert#comment-59680 Marcie McGoldrick Tue, 05 Feb 2013 17:40:14 +0000 http://thecraftsdept.marthastewart.com/wp-content/uploads/2013/01/bench-md109601_vert.jpg#comment-59680 We marked the corners of the bench top where they met the copper frame. Then used a drill with a boring bit to make holes in the bottom of the bench top so that the copper tees at the top of the frame rest inside. The weight of the top is enough to keep it in place.

http://www.marthastewart.com/956832/industrial-chic-bench

]]> By: laura http://thecraftsdept.marthastewart.com/2013/01/diy-industrial-furniture.html/bench-md109601_vert#comment-59679 laura Tue, 05 Feb 2013 17:20:24 +0000 http://thecraftsdept.marthastewart.com/wp-content/uploads/2013/01/bench-md109601_vert.jpg#comment-59679 how is the top attached to copper pipes?

]]> By: Marcie McGoldrick http://thecraftsdept.marthastewart.com/2013/01/diy-industrial-furniture.html/bench-md109601_vert#comment-59263 Marcie McGoldrick Thu, 31 Jan 2013 16:31:56 +0000 http://thecraftsdept.marthastewart.com/wp-content/uploads/2013/01/bench-md109601_vert.jpg#comment-59263 http://www.marthastewart.com/sites/files/marthastewart.com/ecl/images/content/web/pdf/2012/industrial-furn-0113-bench.pdf

]]> By: Marcie McGoldrick http://thecraftsdept.marthastewart.com/2013/01/diy-industrial-furniture.html/bench-md109601_vert#comment-59262 Marcie McGoldrick Thu, 31 Jan 2013 16:31:40 +0000 http://thecraftsdept.marthastewart.com/wp-content/uploads/2013/01/bench-md109601_vert.jpg#comment-59262 sure - here is the link to the assembly plan with the measurements

]]> By: vicki may http://thecraftsdept.marthastewart.com/2013/01/diy-industrial-furniture.html/bench-md109601_vert#comment-59260 vicki may Thu, 31 Jan 2013 16:13:08 +0000 http://thecraftsdept.marthastewart.com/wp-content/uploads/2013/01/bench-md109601_vert.jpg#comment-59260 Can you give me the measurements for this project, the bench? I can't seem to find them. I'm looking forward to trying this project. How much weight do you think it will hold? I was going to top it with a solid piece of walnut about 3 inches thick.

]]>